Heatherbrae NSW Blacktown NSW Let’s talk 02 4983 2050
Let’s talk
Fambo

Fambo impact hammers and leaders.
Carrier first.

The founder of Fambo designed piling equipment for 40 years. The published range covers hydraulic impact hammers with 250–2,750 kg ram weights, high frequency up to 100 blows per minute, and an all-purpose leader for hydraulic excavators. Hammers may be leader mounted or free suspended. The light construction of the HR250–HR2750 range is described as suitable for low headroom, restricted access and railway piling applications. Confirm pressure, power and carrier compatibility with GANZ before selecting a configuration.

All-purpose leader · HR hydraulic impact hammers

Fambo hydraulic impact hammer on a carrier
Impact hammers Leader or free suspended. Start with the PR-1100 leader
Fambo hydraulic impact hammer from the published range — photograph 1
Fambo hydraulic impact hammer from the published range — photograph 2
Fambo hydraulic impact hammer from the published range — photograph 3
Explore the range

Find the right
models.

Range information, not stock availability. Specifications and configurations require confirmation with GANZ.

6 Fambo models in the published range

Fambo all-purpose leader with hydraulic impact hammer All-purpose leader

FAMBO PR-1100 all-purpose leader

1,300 kg

PR leaders are suitable for FAMBO hammers from HR 500 up to HR 2750. Reach, pile length and rope speed depend on the type of carrier.

Weight
1,300 kg
Length of mast
5,500 mm
Full specification
Length of mast
5,500 mm
Forward rake
45 °
Backward rake
45 °
Side rake
15 ° +/-
Single line pull
15 kN
Rope speed
40 m/min · dependent on type of carrier
Reach
10 m · dependent on type of carrier
Pile length
10 m · dependent on type of carrier
Weight
1,300 kg
Vertical leader movement
2,980 mm
Oil flow
35 - 60 l/min
Hydraulic pressure (required)
250 bar

Specifications are transcribed from the published GANZ International Fambo range. Pile sizes are average values. Pressure and power labels that conflict in the source are held for manufacturer confirmation.

FAMBO HR-500 hydraulic impact hammer from the published Fambo range Hydraulic impact hammers

FAMBO HR-500 hydraulic impact hammer

500 kg

500 kg piston. 780 kg total weight with standard pile cap. Energy per blow 0 - 4,800 Nm, drop height 0 - 1.0 m. Pile sizes are average values and vary with ground conditions.

Piston weight
500 kg
Energy per blow
0 - 4,800 Nm · steplessly adjustable
Full specification
Piston weight
500 kg
Total weight with standard pile cap
780 kg
Blows per minute
0 - 100 · steplessly adjustable
Energy per blow
0 - 4,800 Nm · steplessly adjustable
Drop height
0 - 1.0 m · steplessly adjustable
Length (A)
2,195 mm
Length (B)
3,195 mm
Driving axis (C)
280 mm
Width (D)
435 mm
Height (E)
545 mm
Min. weight
16 t
Pressure
250 bar
Oil flow
40-75 l/min
Hydraulic pressure (required)
Awaiting manufacturer confirmation awaiting manufacturer confirmation
Electrical power
24 V DC
Pile sizes
Average values. Depending on nature of ground, upwards or downwards variations may occur.
Timber piles
25 cm Ø max · 70 kg/m max
Concrete piles
20 x 20 cm max · 100 kg/m max
Steel tubes
25 cm Ø max · 75 kg/m max
Steel beams
200 HEA max · 75 kg/m max
Sheet piles
75 kg/m max
Maximum weight
1,200 kg
Standard pile cap length (A)
180 mm
Outer diameter (B)
345 mm
Inner diameter (C)
305 mm
Depth (D)
120 mm
Pile cap weight
56 kg

Specifications are transcribed from the published GANZ International Fambo range. Pile sizes are average values. Pressure and power labels that conflict in the source are held for manufacturer confirmation.

Fambo HR 1000 hydraulic impact hammer from the published Fambo range Hydraulic impact hammers

Fambo HR 1000 hydraulic impact hammer

1,000 kg

1,000 kg piston. 1,800 kg total weight with standard pile cap. Energy per blow 0 - 11,770 Nm, drop height 0 - 1.2 m. Pile sizes are average values and vary with ground conditions.

Piston weight
1,000 kg
Energy per blow
0 - 11,770 Nm · steplessly adjustable
Full specification
Piston weight
1,000 kg
Total weight with standard pile cap
1,800 kg
Blows per minute
0 - 100 · steplessly adjustable
Energy per blow
0 - 11,770 Nm · steplessly adjustable
Drop height
0 - 1.2 m · steplessly adjustable
Length (A)
3,250 mm
Length (B)
3,250 mm
Driving axis (C)
435 mm
Width (D)
570 mm
Height (E)
850 mm
Min. weight
22 t
Pressure
200 bar
Oil flow
40-90 l/min
Hydraulic pressure (required)
Awaiting manufacturer confirmation awaiting manufacturer confirmation
Electrical power
24 V DC
Pile sizes
Average values. Depending on nature of ground, upwards or downwards variations may occur.
Timber piles
30 cm Ø max · 100 kg/m max
Concrete piles
25 x 25 cm max · 200 kg/m max
Steel tubes
30 cm Ø max · 175 kg/m max
Steel beams
240 HEA max · 175 kg/m max
Sheet piles
175 kg/m max
Maximum weight
2,500 kg
Standard pile cap length (A)
200 mm
Outer diameter (B)
420 mm
Inner diameter (C)
370 mm
Depth (D)
120 mm
Pile cap weight
141 kg
Universal adapter length (E)
323 mm
Outer diameter (F)
522 mm
Distance (G)
150 mm
Inner diameter (H)
300 mm
Hole diameter (I)
26 mm
Adapter weight
228 kg

Specifications are transcribed from the published GANZ International Fambo range. Pile sizes are average values. Pressure and power labels that conflict in the source are held for manufacturer confirmation.

Fambo HR 1500 hydraulic impact hammer from the published Fambo range Hydraulic impact hammers

Fambo HR 1500 hydraulic impact hammer

1,500 kg

1,500 kg piston. 2,300 kg total weight with standard pile cap. Energy per blow 0 - 17,650 Nm, drop height 0 - 1.2 m. Pile sizes are average values and vary with ground conditions.

Piston weight
1,500 kg
Energy per blow
0 - 17,650 Nm · steplessly adjustable
Full specification
Piston weight
1,500 kg
Total weight with standard pile cap
2,300 kg
Blows per minute
0 - 100 · steplessly adjustable
Energy per blow
0 - 17,650 Nm · steplessly adjustable
Drop height
0 - 1.2 m · steplessly adjustable
Length (A)
3,250 mm
Length (B)
3,780 mm
Driving axis (C)
435 mm
Width (D)
570 mm
Height (E)
850 mm
Min. weight
25 t
Pressure
250 bar
Oil flow
40-90 l/min
Hydraulic pressure (required)
Awaiting manufacturer confirmation awaiting manufacturer confirmation
Electrical power
24 V DC
Pile sizes
Average values. Depending on nature of ground, upwards or downwards variations may occur.
Timber piles
35 cm Ø max · 125 kg/m max
Concrete piles
27 x 27 cm max · 225 kg/m max
Steel tubes
35 cm Ø max · 200 kg/m max
Steel beams
280 HEA max · 175 kg/m max
Sheet piles
175 kg/m max
Maximum weight
3,500 kg
Standard pile cap length (A)
200 mm
Outer diameter (B)
420 mm
Inner diameter (C)
370 mm
Depth (D)
120 mm
Pile cap weight
141 kg
Universal adapter length (E)
323 mm
Outer diameter (F)
522 mm
Distance (G)
150 mm
Inner diameter (H)
300 mm
Hole diameter (I)
26 mm
Adapter weight
228 kg

Specifications are transcribed from the published GANZ International Fambo range. Pile sizes are average values. Pressure and power labels that conflict in the source are held for manufacturer confirmation.

Fambo HR 2000 hydraulic impact hammer from the published Fambo range Hydraulic impact hammers

Fambo HR 2000 hydraulic impact hammer

2,000 kg

2,000 kg piston. 2,800 kg total weight with standard pile cap. Energy per blow 0 - 23,500 Nm, drop height 0 - 1.2 m. Pile sizes are average values and vary with ground conditions.

Piston weight
2,000 kg
Energy per blow
0 - 23,500 Nm · steplessly adjustable
Full specification
Piston weight
2,000 kg
Total weight with standard pile cap
2,800 kg
Blows per minute
0 - 100 · steplessly adjustable
Energy per blow
0 - 23,500 Nm · steplessly adjustable
Drop height
0 - 1.2 m · steplessly adjustable
Length (A)
3,300 mm
Length (B)
4,500 mm
Driving axis (C)
435 mm
Width (D)
570 mm
Height (E)
850 mm
Min. weight
30 t
Pressure
310 bar
Oil flow
40-90 l/min
Hydraulic pressure (required)
Awaiting manufacturer confirmation awaiting manufacturer confirmation
Electrical power
24 V DC
Pile sizes
Average values. Depending on nature of ground, upwards or downwards variations may occur.
Timber piles
40 cm Ø max · 125 kg/m max
Concrete piles
28 x 28 cm max · 225 kg/m max
Steel tubes
40 cm Ø max · 200 kg/m max
Steel beams
300 HEA max · 200 kg/m max
Sheet piles
200 kg/m max
Maximum weight
5,000 kg
Standard pile cap length (A)
200 mm
Outer diameter (B)
420 mm
Inner diameter (C)
370 mm
Depth (D)
120 mm
Pile cap weight
141 kg
Universal adapter length (E)
323 mm
Outer diameter (F)
522 mm
Distance (G)
150 mm
Inner diameter (H)
300 mm
Hole diameter (I)
26 mm
Adapter weight
228 kg

Specifications are transcribed from the published GANZ International Fambo range. Pile sizes are average values. Pressure and power labels that conflict in the source are held for manufacturer confirmation.

Fambo HR 2750 hydraulic impact hammer from the published Fambo range Hydraulic impact hammers

Fambo HR 2750 hydraulic impact hammer

2,750 kg

2,750 kg piston. 3,650 kg total weight with standard pile cap. Energy per blow 0 - 32,500 Nm, drop height 0 - 1.2 m. Pile sizes are average values and vary with ground conditions.

Piston weight
2,750 kg
Energy per blow
0 - 32,500 Nm · steplessly adjustable
Full specification
Piston weight
2,750 kg
Total weight with standard pile cap
3,650 kg
Blows per minute
0 - 100 · steplessly adjustable
Energy per blow
0 - 32,500 Nm · steplessly adjustable
Drop height
0 - 1.2 m · steplessly adjustable
Length (A)
3,470 mm
Length (B)
4,625 mm
Driving axis (C)
455 mm
Width (D)
600 mm
Height (E)
890 mm
Min. weight
40 t
Pressure
330 bar
Oil flow
60-120 l/min
Hydraulic pressure (required)
Awaiting manufacturer confirmation awaiting manufacturer confirmation
Electrical power
24 V DC
Pile sizes
Average values. Depending on nature of ground, upwards or downwards variations may occur.
Timber piles
40 cm Ø max · 150 kg/m max
Concrete piles
30 x 30 cm max · 250 kg/m max
Steel tubes
40 cm Ø max · 250 kg/m max
Steel beams
360 HEA max · 250 kg/m max
Sheet piles
250 kg/m max
Maximum weight
6,000 kg
Standard pile cap length (A)
245 mm
Outer diameter (B)
480 mm
Inner diameter (C)
400 mm
Depth (D)
140 mm
Pile cap weight
170 kg
Universal adapter length (E)
323 mm
Outer diameter (F)
592 mm
Distance (G)
150 mm
Inner diameter (H)
306 mm
Hole diameter (I)
26 mm
Adapter weight
305 kg

Specifications are transcribed from the published GANZ International Fambo range. Pile sizes are average values. Pressure and power labels that conflict in the source are held for manufacturer confirmation.

Fambo × GANZ International

Carrier first.
Then the hammer.

Fambo’s published range is useful once the excavator, pile type and site constraints are on the table. GANZ can help you read the shared brochure against the job.

01 / The machinery

Leader or
free suspended.

Compare the PR-1100 leader and five HR hammers. Range listings are not stock, and one brochure covers the published family.

02 / The configuration

Start with
the carrier.

Oil flow, pressure and excavator class sit in the published tables. Some pressure labels still need manufacturer confirmation.

03 / The people

A conversation
beyond the PDF.

Talk to GANZ about the pile, access and the next document you need before treating a figure as a configuration.

The GANZ commitment

The right support.
Long after the conversation.

One shared manufacturer brochure covers the published Fambo range. GANZ can help you read the carrier and application caveats before you rely on a specification.

Meet the people behind GANZ
Soilmec R625 from the GANZ used equipment range
Another way forward

Looking for used?

Explore the used equipment selection, then ask the team about current availability.

View used stock
For the project ahead

Need one for a job?

Tell us the work, the location and the timing. Let’s discuss suitable hire options and availability.

Discuss equipment hire
Your next conversation starts here

Tell us the carrier,
or the pile.

Share the excavator or carrier, pile type and site constraints. You do not need to know the exact hammer.

  • Carrier equipmentExcavator class or the machine that will mount or suspend the hammer
  • Pile typeTimber, concrete, steel tube, beam or sheet pile
  • Site constraintsAccess, headroom, railway or low-headroom work

Discuss your configuration

No model selected

Privacy · Website terms