Heatherbrae NSW Blacktown NSW Let’s talk 02 4983 2050
Let’s talk
Pajot

Pajot air hammers and piling tools.
Start with the air supply.

Pajot has produced air-driven piling hammers for over 100 years and is run by the fourth generation of the Pajot family. The published range covers air-driven hammers from 26 to 5,200 kg, frequencies from 1,600 to 120 blows per minute according to the model, the SPR108 guardrail driver and a sheet-pile threader. Noise-proof covers are listed as available for all impact hammers. Confirm the compressed-air supply and pile type with GANZ.

Type C · Conventional hammers · SPR108 · Threader

Pajot Type C air pile hammer
Air hammers Four families. Nine working documents. Start with Type C
Explore the range

Find the right
models.

Range information, not stock availability. Specifications and configurations require confirmation with GANZ.

15 Pajot models in the published range

Pajot 800 C Type C air pile hammer Type C hammers

Pajot 800 C

455 kgm/blow

Type C air pile hammer. 240 blows/min, 9 m³/min compressed-air flow, 455 kgm/blow at 7 bar.

Full specification
Approx. no. of blows per minute (1)
240
Approx compressed air flow (1)
9 m³/min
Power in kgm/blow @ 7 bar (1)
455
Inner diameter of intake pipe (1)
40 mm
Metal sheet piles (2)
Width 300–600 mm · height 6–8 m
Square or round wooden piles (2)
Width 440 mm · height 4–8 m
Reinforced concrete piles (2)
200 x 200 mm · height 4–6 m

Specifications are transcribed from the published GANZ International Pajot range, including source notes (1) and (2). Slash values are unpublished in the source, not assumed to be zero.

Pajot 1200 C Type C air pile hammer Type C hammers

Pajot 1200 C

700 kgm/blow

Type C air pile hammer. 270 blows/min, 11 m³/min compressed-air flow, 700 kgm/blow at 7 bar.

Full specification
Approx. no. of blows per minute (1)
270
Approx compressed air flow (1)
11 m³/min
Power in kgm/blow @ 7 bar (1)
700
Inner diameter of intake pipe (1)
40 mm
Metal sheet piles (2)
Width 300–750 mm · height 6–11 m
Square or round wooden piles (2)
Width 440 mm · height 4–9 m
Reinforced concrete piles (2)
200 x 200 mm · height 4–7 m

Specifications are transcribed from the published GANZ International Pajot range, including source notes (1) and (2). Slash values are unpublished in the source, not assumed to be zero.

Pajot 4200 C Type C air pile hammer Type C hammers

Pajot 4200 C

3600 kgm/blow

Type C air pile hammer. 140 blows/min, 33 m³/min compressed-air flow, 3600 kgm/blow at 7 bar.

Full specification
Approx. no. of blows per minute (1)
140
Approx compressed air flow (1)
33 m³/min
Power in kgm/blow @ 7 bar (1)
3600
Inner diameter of intake pipe (1)
50 mm
Metal sheet piles (2)
Width pair · height 20 m
Square or round wooden piles (2)
Width 1,220 mm · height 20 m
Reinforced concrete piles (2)
400 x 400 mm · height 20 m

Specifications are transcribed from the published GANZ International Pajot range, including source notes (1) and (2). Slash values are unpublished in the source, not assumed to be zero.

Pajot 5200 C Type C air pile hammer Type C hammers

Pajot 5200 C

5200 kgm/blow

Type C air pile hammer. 120 blows/min, 35 m³/min compressed-air flow, 5200 kgm/blow at 7 bar.

Full specification
Approx. no. of blows per minute (1)
120
Approx compressed air flow (1)
35 m³/min
Power in kgm/blow @ 7 bar (1)
5200
Inner diameter of intake pipe (1)
50 mm
Metal sheet piles (2)
Width pair · height 30 m
Square or round wooden piles (2)
Width 1,220 mm · height 20 m
Reinforced concrete piles (2)
400 x 400 mm · height 25 m

Specifications are transcribed from the published GANZ International Pajot range, including source notes (1) and (2). Slash values are unpublished in the source, not assumed to be zero.

Pajot 26 conventional air pile driver Conventional hammers

Pajot 26

1600 bpm

Conventional air pile driver. 1600 blows/min and 1.5 m³/min compressed-air flow.

Approx. no. of blows per minute (1)
1600
Approx compressed air flow (1)
1.5 m³/min
Full specification
Approx. no. of blows per minute (1)
1600
Approx compressed air flow (1)
1.5 m³/min
Power in kgm/blow @ 7 bar (1)
/
Inner diameter of intake pipe (1)
25 mm
Approximate outer dimensions (1)
285x180x520 mm
Metal sheet piles (2)
/
Square or round wooden piles (2)
/
Reinforced concrete piles (2)
Max 120 mm · height /

Specifications are transcribed from the published GANZ International Pajot range, including source notes (1) and (2). Slash values are unpublished in the source, not assumed to be zero.

Pajot 50 conventional air pile driver Conventional hammers

Pajot 50

1350 bpm

Conventional air pile driver. 1350 blows/min and 1.8 m³/min compressed-air flow.

Approx. no. of blows per minute (1)
1350
Approx compressed air flow (1)
1.8 m³/min
Full specification
Approx. no. of blows per minute (1)
1350
Approx compressed air flow (1)
1.8 m³/min
Power in kgm/blow @ 7 bar (1)
/
Inner diameter of intake pipe (1)
25 mm
Approximate outer dimensions (1)
200x615 mm
Metal sheet piles (2)
/
Square or round wooden piles (2)
/
Reinforced concrete piles (2)
Max 180 mm · height /

Specifications are transcribed from the published GANZ International Pajot range, including source notes (1) and (2). Slash values are unpublished in the source, not assumed to be zero.

Pajot 115 conventional air pile driver Conventional hammers

Pajot 115

500 bpm

Conventional air pile driver. 500 blows/min and 2.2 m³/min compressed-air flow.

Approx. no. of blows per minute (1)
500
Approx compressed air flow (1)
2.2 m³/min
Full specification
Approx. no. of blows per minute (1)
500
Approx compressed air flow (1)
2.2 m³/min
Power in kgm/blow @ 7 bar (1)
47
Inner diameter of intake pipe (1)
25 mm
Approximate outer dimensions (1)
970x136x136 mm
Metal sheet piles (2)
2,200x525x525 mm · height 1–2 m
Square or round wooden piles (2)
Max 100x100 mm · height 2 m
Reinforced concrete piles (2)
/

Specifications are transcribed from the published GANZ International Pajot range, including source notes (1) and (2). Slash values are unpublished in the source, not assumed to be zero.

Pajot 160 conventional air pile driver Conventional hammers

Pajot 160

450 bpm

Conventional air pile driver. 450 blows/min and 3 m³/min compressed-air flow.

Approx. no. of blows per minute (1)
450
Approx compressed air flow (1)
3 m³/min
Full specification
Approx. no. of blows per minute (1)
450
Approx compressed air flow (1)
3 m³/min
Power in kgm/blow @ 7 bar (1)
80
Inner diameter of intake pipe (1)
25 mm
Approximate outer dimensions (1)
960x160x160 mm
Metal sheet piles (2)
200–400 mm · height 1–2 m
Square or round wooden piles (2)
Max 100x100 mm · height 2 m
Reinforced concrete piles (2)
/

Specifications are transcribed from the published GANZ International Pajot range, including source notes (1) and (2). Slash values are unpublished in the source, not assumed to be zero.

Pajot 300 conventional air pile driver Conventional hammers

Pajot 300

420 bpm

Conventional air pile driver. 420 blows/min and 3.5 m³/min compressed-air flow.

Approx. no. of blows per minute (1)
420
Approx compressed air flow (1)
3.5 m³/min
Full specification
Approx. no. of blows per minute (1)
420
Approx compressed air flow (1)
3.5 m³/min
Power in kgm/blow @ 7 bar (1)
110
Inner diameter of intake pipe (1)
25 mm
Approximate outer dimensions (1)
1250x175x175 mm
Metal sheet piles (2)
200–400 mm · height 2–3 m
Square or round wooden piles (2)
Max 100x200 mm planks · height 2–3 m
Reinforced concrete piles (2)
/

Specifications are transcribed from the published GANZ International Pajot range, including source notes (1) and (2). Slash values are unpublished in the source, not assumed to be zero.

Pajot 600 conventional air pile driver Conventional hammers

Pajot 600

300 bpm

Conventional air pile driver. 300 blows/min and 7 m³/min compressed-air flow.

Approx. no. of blows per minute (1)
300
Approx compressed air flow (1)
7 m³/min
Full specification
Approx. no. of blows per minute (1)
300
Approx compressed air flow (1)
7 m³/min
Power in kgm/blow @ 7 bar (1)
214
Inner diameter of intake pipe (1)
40 mm
Approximate outer dimensions (1)
1300x270x270 mm
Metal sheet piles (2)
300–400 mm · height 3–5 m
Square or round wooden piles (2)
Max 100x300 mm · height 3–5 m
Reinforced concrete piles (2)
150x150 mm · height 2–3 m

Specifications are transcribed from the published GANZ International Pajot range, including source notes (1) and (2). Slash values are unpublished in the source, not assumed to be zero.

Pajot 1400 conventional air pile driver Conventional hammers

Pajot 1400

240 bpm

Conventional air pile driver. 240 blows/min and 11 m³/min compressed-air flow.

Approx. no. of blows per minute (1)
240
Approx compressed air flow (1)
11 m³/min
Full specification
Approx. no. of blows per minute (1)
240
Approx compressed air flow (1)
11 m³/min
Power in kgm/blow @ 7 bar (1)
615
Inner diameter of intake pipe (1)
40 mm
Approximate outer dimensions (1)
1600x390x390 mm
Metal sheet piles (2)
300–400 mm · height 6–11 m
Square or round wooden piles (2)
Max 250–300 mm · height 6–9 m
Reinforced concrete piles (2)
200x200 mm · height 5–7 m

Specifications are transcribed from the published GANZ International Pajot range, including source notes (1) and (2). Slash values are unpublished in the source, not assumed to be zero.

Pajot 2800 conventional air pile driver Conventional hammers

Pajot 2800

190 bpm

Conventional air pile driver. 190 blows/min and 20 m³/min compressed-air flow.

Approx. no. of blows per minute (1)
190
Approx compressed air flow (1)
20 m³/min
Full specification
Approx. no. of blows per minute (1)
190
Approx compressed air flow (1)
20 m³/min
Power in kgm/blow @ 7 bar (1)
1420
Inner diameter of intake pipe (1)
50 mm
Approximate outer dimensions (1)
1900x500x500 mm
Metal sheet piles (2)
Widest or 2 at a time · height 11–15 m
Square or round wooden piles (2)
Max 350 mm · height 10–15 m
Reinforced concrete piles (2)
300x300 mm · height 8–12 m

Specifications are transcribed from the published GANZ International Pajot range, including source notes (1) and (2). Slash values are unpublished in the source, not assumed to be zero.

Pajot 3600 conventional air pile driver Conventional hammers

Pajot 3600

160 bpm

Conventional air pile driver. 160 blows/min and 30 m³/min compressed-air flow.

Approx. no. of blows per minute (1)
160
Approx compressed air flow (1)
30 m³/min
Full specification
Approx. no. of blows per minute (1)
160
Approx compressed air flow (1)
30 m³/min
Power in kgm/blow @ 7 bar (1)
2334
Inner diameter of intake pipe (1)
50 mm
Approximate outer dimensions (1)
2200x525x525 mm
Metal sheet piles (2)
Widest or 2 at a time · height 15–18 m
Square or round wooden piles (2)
Max 400 mm · height 15–18 m
Reinforced concrete piles (2)
350x350 mm · height 12–16 m

Specifications are transcribed from the published GANZ International Pajot range, including source notes (1) and (2). Slash values are unpublished in the source, not assumed to be zero.

Pajot SPR108 guardrail post pile driver SPR108 guardrail driver

Pajot SPR108

850 kg

Guardrail post pile driver with folding mast. Published weight excluding hammer, including eight counterweights, is 850 kg. Designed for 115, 160, 270 and 300 kg impact hammers and a 2,200 to 3,500 litre compressor.

Maximum working height under hammer
300 · 2,350 mm
Full specification
Total weight excluding hammer, including 8 counterweights
850 kg
Removable counterweights
57 kg x 8 · 456 kg plates
Maximum working height under hammer
300 · 2,350 mm
Chassis offset
1,150 mm
Mast inclination
Forward, back and side-to-side
Designed for
115, 160, 270 and 300 kg impact hammers
Compressed air lifting tackle
500 kg lifting force with progressive pneumatic remote control and emergency stop

Specifications are transcribed from the published GANZ International Pajot range, including source notes (1) and (2). Slash values are unpublished in the source, not assumed to be zero.

Pajot sheet pile threader Sheet pile threader

Pajot threader

Tool

Threads single AU and PU piles or pairs as part of a curtain wall. The published description says the operation is performed by pulling on a rope and the machine can be adapted to any profile by changing a single part.

Full specification
Application
Single AU and PU piles or pairs in a curtain wall
Operation
Pulling on a rope
Adaptation
Any profile by changing a single part

Specifications are transcribed from the published GANZ International Pajot range, including source notes (1) and (2). Slash values are unpublished in the source, not assumed to be zero.

Pajot × GANZ International

Start with the air.
Then the pile.

Pajot’s published hammers, SPR108 and threader are useful once the compressor and pile profile are known.

01 / The machinery

Air hammers
and tools.

Type C, conventional, the SPR108 guardrail driver and a sheet-pile threader. Listings are not stock.

02 / The configuration

Confirm the
air supply.

Blow rate, air flow and pile guidance are approximate. Slash values stay unpublished, not zero.

03 / The people

Ask for the
right document.

GANZ can request the correct technical sheet.

The GANZ commitment

The right support.
Long after the conversation.

Select a model to find its technical details.

Meet the people behind GANZ
Soilmec R625 from the GANZ used equipment range
Another way forward

Looking for used?

Explore the used equipment selection, then ask the team about current availability.

View used stock
For the project ahead

Need one for a job?

Tell us the work, the location and the timing. Let’s discuss suitable hire options and availability.

Discuss equipment hire
Your next conversation starts here

Tell us the pile,
and the air you have.

Share the pile type, the application and the available compressed-air supply.

  • Pile typeSheet, timber, concrete or tubular pile
  • ApplicationPiling, post driving, guardrail or threading
  • Compressed-air supplyCompressor capacity where known
02 4983 2050 sales@ganzglobal.com

Discuss your configuration

No model selected

Privacy · Website terms